Съвет за конфигурация

Всичко, което ви вълнува около голфа, бингото и стрип-покера...

Moderator: AlDim

User avatar
Dante
Mistborn
Posts: 1275
Joined: Sun Jan 20, 2008 7:58 pm

Post by Dante » Wed Jun 13, 2012 3:54 pm

E, oк, подигравайте се, аз просто благодарих :)
Сайт за нещата, които ни вълнуват - http://podmosta.bg/

User avatar
The Dragon
Elder God
Posts: 9054
Joined: Wed Jan 14, 2004 9:03 pm

Post by The Dragon » Sat Jun 16, 2012 10:11 pm

За спора за форм факторите на дъната

цитат от едно скорошно ревю на един малък и некомпетентен сайт

http://www.anandtech.com/show/6012/lian ... s-design/7
We're at a juncture now where there are very few reasons to go with an ATX motherboard over a Micro-ATX board. One of those is if you're putting together a multi-GPU system, and that's a use case you can throw right out the window with the PC-A55 due to the way the cooling is engineered. With that out of the way, I see very little reason to go with an ATX motherboard if it can be avoided. Motherboards are so fully-featured at this point that expansion cards just aren't as relevant as they used to be.
The sinking of the Titanic was a miracle to the lobsters in the ship's kitchen.

Razaelski
Paragon
Posts: 555
Joined: Sat Jan 21, 2012 11:12 pm

Post by Razaelski » Sun Jun 17, 2012 9:05 pm

The Dragon wrote:За спора за форм факторите на дъната

цитат от едно скорошно ревю на един малък и некомпетентен сайт

http://www.anandtech.com/show/6012/lian ... s-design/7
We're at a juncture now where there are very few reasons to go with an ATX motherboard over a Micro-ATX board. One of those is if you're putting together a multi-GPU system, and that's a use case you can throw right out the window with the PC-A55 due to the way the cooling is engineered. With that out of the way, I see very little reason to go with an ATX motherboard if it can be avoided. Motherboards are so fully-featured at this point that expansion cards just aren't as relevant as they used to be.
нищо, че масово хората с ATX. кефи ме как се вади вода от девет кладенеца

Who is online

Users browsing this forum: No registered users and 16 guests